Our Reproductions

Our first reproductions were, of all things, 80mm bore pistons! It took Richard about ten years to finalize the design during which sets of no less than four different prototypes were made. So, sometimes, making a reproduction is a long-term project.

Since then, we've reproduced lots of different kinds of parts. Some for the Okrasa engine, some for the Karmann Ghia in particular, and, well, just about anything that's needed that can't be readily purchased.

Here's a partial list of things we've reproduced so you can get an idea of the things we can reproduce for you, too.

80mm bore pistons for the early engines
Karmann Ghia bumper arm covers for European-spec. bumpers.
August '57 through August '60 Karmann Ghia door panel upholstery
Okrasa fuel lines
Okrasa throttle linkages
Okrasa valves, including springs, retainers, and keepers.
Auxiliary oil filters for the early "two piece case" engines.
Full-flow oil filter for Denzel - can also be used on the others as well.
Denzel rocker arms and shafts.
Okrasa auxiliary oil cooler.
Denzel cylinder head nuts.
Individual main bearings.
Karmann Ghia glove box decal, five colors, in German.
Tachometer for the early Karmann Ghia, through 1961 - fits through '66.

When we get a little more time, we'll be posting photographs and descriptions.

We can make other things if you want to commission something.

Contact Us